Cutting steel pipes can be a challenging task, especially if you’re using the wrong tools or techniques.
If you’re struggling to cut through steel pipes with a Sawzall, you’re not alone. Many people find it difficult to get the job done quickly and efficiently.
But fear not, we’ve got you covered! In this article, we’ll share some tips and tricks on how to cut steel pipe with a Sawzall like a pro.
Whether you’re a DIY enthusiast or a professional contractor, these tips will help you get the job done faster and with greater ease.
So, let’s dive in and learn how to cut steel pipe with a Sawzall!
How To Cut Steel Pipe With Sawzall
First and foremost, it’s important to use the right blade for the job. Steel pipes require a blade that is specifically designed for metal cutting. Using the wrong blade can result in a lot of frustration and wasted time.
Once you have the right blade, it’s time to prepare the pipe for cutting. Make sure the pipe is securely held in place and won’t move around during the cutting process. If possible, use a clamp or vise to hold the pipe steady.
Next, position the Sawzall so that the blade is perpendicular to the pipe. This will ensure a straight cut and prevent the blade from getting stuck or bending.
When you’re ready to start cutting, turn on the Sawzall and gently guide the blade into the pipe. Be sure to keep your fingers away from the blade and use both hands to control the tool.
As you cut through the pipe, you may notice some vibration or movement. To minimize this, use the foot rest on the Sawzall to stabilize the tool against the pipe.
If you’re having trouble making progress, try adjusting your grip on the pipe or using a bit more downward force on the blade. But be careful not to apply too much pressure, as this can cause the blade to bend or break.
Finally, take your time and be patient. Cutting through steel pipes can be a slow process, but with practice and persistence, you’ll get better at it over time.
Choosing The Right Blade For Cutting Steel Pipe
When it comes to cutting steel pipes with a Sawzall, choosing the right blade is crucial. The blade you select should be specifically designed for metal cutting and have the appropriate TPI (Teeth Per Inch) count for the thickness of the pipe.
For thinner steel pipes, such as sheet metal, a bi-metal blade with 18-24 TPI is recommended. Thicker steel pipes, like steel pipe or angle irons, require a blade with 14-18 TPI. It’s important to note that when cutting aluminum, an 8-10 TPI blade is best.
In addition to TPI, the material of the blade is also important. Bi-metal or carbide-tipped blades are the best options for cutting metal. For jobs that involve cutting cast iron, stainless steel, and high-strength alloys, a carbide-tipped blade with at least 8 TPI is recommended.
When it comes to brands, MK Morse and Diablo are two popular choices for metal cutting blades. If you’re in need of a carbide-tipped blade, the Diablo Steel Demon Carbide Tipped is a great option as it can cut through almost anything.
It’s important to note that when using Exact PipeCut and Cut+Bevel machines, they typically come with a default blade that may not be suitable for all pipe cutting needs. It’s recommended to separately order blades based on your specific needs to ensure straight, clean, and seamless cuts without causing damage to the blade, pipe, or machine.
Preparing The Steel Pipe For Cutting
Before you start cutting your steel pipe with a Sawzall, it’s important to properly prepare the pipe. This will help ensure a clean and accurate cut, as well as prevent any accidents or injuries.
First, make sure the pipe is securely held in place. This can be done using a clamp or vise to keep the pipe steady and prevent it from moving around during the cutting process. If you don’t have access to a clamp or vise, try using a sturdy workbench or table to hold the pipe in place.
Next, position the Sawzall so that the blade is perpendicular to the pipe. This means that the blade should be at a 90-degree angle to the surface of the pipe. This will help ensure a straight and accurate cut, as well as prevent the blade from getting stuck or bending.
Before you start cutting, make sure you have the right blade for the job. Steel pipes require a blade that is specifically designed for metal cutting. Using the wrong blade can result in a lot of frustration and wasted time.
Once you have everything set up and ready to go, it’s time to start cutting. Turn on the Sawzall and gently guide the blade into the pipe. Be sure to keep your fingers away from the blade and use both hands to control the tool.
As you cut through the pipe, you may notice some vibration or movement. To minimize this, use the foot rest on the Sawzall to stabilize the tool against the pipe.
If you’re having trouble making progress, try adjusting your grip on the pipe or using a bit more downward force on the blade. But be careful not to apply too much pressure, as this can cause the blade to bend or break.
Finally, take your time and be patient. Cutting through steel pipes can be a slow process, but with practice and persistence, you’ll get better at it over time. By following these steps and taking proper safety precautions, you’ll be able to cut steel pipes with a Sawzall like a pro.
Safety Precautions To Take When Using A Sawzall
When using a Sawzall to cut steel pipes, there are several important safety precautions to keep in mind. First and foremost, always wear appropriate personal protective equipment, including gloves, safety glasses or goggles, and ear protection.
It’s also important to use the Sawzall in a well-lit area where you can clearly see what you’re doing. Avoid distractions and keep the work area clear of clutter or debris.
When handling the tool, be sure to use both hands and maintain a firm grip on the Sawzall at all times. Never put your hands near the operating blade or attempt to touch it while it’s in motion.
In addition, make sure the Sawzall is properly grounded and never use it in wet or damp conditions. Check the power cord for any signs of damage before use and avoid using extension cords that are not rated for the tool.
Finally, always follow manufacturer instructions and guidelines for maintenance and blade replacement. Allow the blade to cool down before attempting to change it, and never attempt to force a dull or damaged blade to cut through steel pipes.
By following these safety precautions, you can ensure a safe and successful cutting experience with your Sawzall.
Troubleshooting Common Issues When Cutting Steel Pipe With A Sawzall
Cutting steel pipes with a Sawzall can sometimes present some challenges. Here are some common issues you may encounter and how to troubleshoot them:
1. Blade Dulling: If you notice that the blade is becoming dull, it’s time to replace it. Using a dull blade can make the cutting process much more difficult and can even damage the pipe.
2. Blade Getting Stuck: If the blade gets stuck in the pipe, try adjusting your grip on the tool and applying more downward force. If this doesn’t work, turn off the Sawzall and carefully remove the blade from the pipe.
3. Uneven Cuts: If you’re having trouble getting a straight cut, try using a guide or marking the pipe with a straight line before cutting. This will help you stay on track and prevent the blade from wandering.
4. Pipe Movement: If the pipe is moving around too much during cutting, try using a clamp or vise to hold it in place more securely. You can also try stabilizing the Sawzall with your foot or using a second hand to hold the pipe steady.
5. Blade Bending or Breaking: Applying too much pressure or using an improper technique can cause the blade to bend or break. To prevent this, use a light touch and let the blade do most of the work. Also, make sure you’re using the right type of blade for the job.
By following these tips, you can troubleshoot common issues when cutting steel pipes with a Sawzall and achieve accurate and efficient cuts every time.
Cleaning Up After Cutting Steel Pipe With A Sawzall
After you’ve successfully cut through the steel pipe with your Sawzall, it’s important to properly clean up the area to avoid any potential hazards. First, turn off the Sawzall and set it aside in a safe place.
Next, use a wire brush or sandpaper to remove any rough edges or burrs left on the cut end of the pipe. This will ensure a smooth and even surface that is safe to handle.
If there are any metal shavings or debris left on the ground or work surface, use a broom and dustpan to sweep them up. Make sure to dispose of them properly in a designated metal scrap bin or container.
It’s also a good idea to wear gloves and eye protection during the cleanup process to avoid any potential injuries from sharp metal pieces.
Finally, inspect the cut end of the pipe to make sure it’s clean and free of any debris or rough edges. If necessary, use a file or sandpaper to smooth out any remaining imperfections.
By following these steps, you can safely and effectively cut through steel pipes with a Sawzall and clean up the area afterwards with ease.
FAQs
Can I use sawzall to cut metal pipe? ›
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is the best way to cut steel pipe? ›Steel pipe cutters are the best tool for cutting steel pipe. They make a square (90°) cut and leave a smooth finish that requires minimal deburring. However, pipe cutters are much slower at cutting than power saws. So, if a job requires a lot of cutting, consider one of the power tools discussed later in this section.
What is the best way to cut 2 inch steel pipe? ›The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs.
Can you cut metal by hand? ›There are various hand tools for cutting metal, and while they require more time and effort than a power tool, they can be equally helpful, especially for smaller projects. These are the hand tools you'll commonly see in a metal shop.
What is the best hand saw to cut metal pipes? ›A hacksaw is the best hand tool for cutting metal such as steel, copper, brass, or aluminum. It is also the plumber's choice for sectioning PVC pipes. However, it is not suitable for cutting through stone objects. Hacksaws work by running the teeth of the blade over the metal back and forth in a sawing motion.
How many teeth per inch to cut steel? ›TPI is the number of teeth the blade has per inch. If you're looking to cut wood or other soft materials, you'll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.
How do you cut solid steel pipe? ›Heavy-duty steel pipe and tube cutters are usually the easiest to use, but for tight spaces, an angle grinder or reciprocating saw may be needed. When using a metal pipe cutter, align the tool around the marked place on the galvanized pipe and rotate so that the wheel cuts deeper into the pipe until severed.
How do you cut inch thick steel? ›Use waterjet, plasma, or laser for steel thinner than 0.250”. Use oxy-fuel if it's over 8”. Use oxy-fuel or waterjet if it's over 2”. Use plasma, oxy-fuel, or waterjet if it's over 1.25”.
Which tool is appropriate if a plumber wants to cut metal pipe? ›Pipe cutters are tools used for slicing or cutting pipes. They are commonly used by plumbers due to their reliability and efficiency.
What is the easiest way to cut metal tubing? ›Heavy-duty steel pipe and tube cutters are usually the easiest to use, but for tight spaces, an angle grinder or reciprocating saw may be needed. When using a metal pipe cutter, align the tool around the marked place on the galvanized pipe and rotate so that the wheel cuts deeper into the pipe until severed.
How do you cut metal pipes without a hacksaw? ›
Angle Grinder
A power tool is useful if you are trying to remove old pipe from a tight space. You'll want to use protective goggles, gloves, and earplugs when working with an angle grinder. Make sure you have the right wheel for cutting metal. Blades with smaller tines are best for this material.
A reciprocating saw can provide a quick and clean cutting method that handles a variety of thicknesses and tube or pipe diameters and contributes to workplace safety.